开发者展示了名为Fursoy Slice-1(核心型号为fursoy_s1_core / fursoy_s1_soc)的64位乱序超标量RISC-V处理器,该核心使用SystemVerilog编写 1。这一开源项目采用Apache License, Version 2.0许可证发布 1。
在功能支持方面,Fursoy Slice-1兼容RV64IMAFDV指令集以及Zba、Zbb、Zicsr和Zifencei扩展 1。其微架构设计为2路超标量乱序执行,配备128项重排序缓冲区(ROB),并支持Sv39虚拟内存 1。测试结果显示,该处理器能在主线Linux 6.6.50内核及BusyBox用户空间环境下运行 1。
综合评估数据表明,该设计针对Nangate 45nm标准单元库进行了评估,目标频率设定为500 MHz 1。在模拟验证中,处理器累计运行了89,861,075个周期,平均每周期指令数(IPC)达到0.84838,且未出现任何内核崩溃现象 1。
The developer of the Fursoy project has released and demonstrated "Fursoy Slice-1," a 64-bit out-of-order superscalar RISC-V processor written in SystemVerilog 1. The core, identified as fursoy_s1_core or fursoy_s1_soc, successfully booted the mainline Linux kernel version 6.6.50 along with a BusyBox userspace environment under an Sv39 virtual memory configuration 1.
Architecturally, Fursoy Slice-1 implements the RV64IMAFDV instruction set, extended with Zba, Zbb, Zicsr, and Zifencei extensions 1. It features a 2-wide superscalar out-of-order design equipped with a 128-entry reorder buffer (ROB) and native support for Sv39 virtual memory 1. Synthesis results target a frequency of 500 MHz on the Nangate 45nm standard-cell library 1. Verification data from simulation covers 89,861,075 cycles, achieving an Instructions Per Cycle (IPC) rate of 0.84838 with zero recorded kernel panics 1. The entire project is distributed under the Apache License, Version 2.0 1.
评论
还没有评论,欢迎留下第一条。