欧洲核子研究中心(CERN)的研究人员在IEEE期刊上发表研究,详细阐述了为“高亮度大型强子对撞机”(HL-LHC)制造下一代Nb₃Sn超导四极磁体的过程 1。这些新磁体旨在实现比现有磁体更高的磁场强度,理论上限约为12特斯拉,以支持计划于2030年后开始的新实验 1。该实验的目标是每秒在每次实验中实现140至200次粒子碰撞 1。项目由Susana Izquierdo Bermúdez领导的约60人团队负责,她自2012年起参与该开发工作 1。
新型磁体使用铌锡化合物(Nb₃Sn)代替目前的铌钛合金(NbTi) 1。由于Nb₃Sn易碎,团队采用特殊的“绕制-反应”(wind-and-react)工艺:先绕制电缆,再在高温惰性气氛下热处理形成超导相 1。热处理温度经历210°C、400°C平台期,最终峰值约650°C,耗时数天 1。团队共生产了250个线圈,其中25个因人为错误或制造挑战导致性能不达标而报废,其余正在作为备份制造中 1。
9月份完成的7.2米长磁体质检确认其达到了11.3特斯拉的峰值磁力 1。
Researchers at the European Organization for Nuclear Research (CERN) have published detailed findings in an IEEE journal regarding the manufacturing of next-generation superconducting quadrupole magnets intended for the High-Luminosity Large Hadron Collider (HL-LHC). 1 These new magnets are designed to achieve higher magnetic field strengths than current models, with a theoretical limit of approximately 12 tesla, to support new experimental phases scheduled to begin after 2030. 1 The project is led by a team of about 60 people under Susana Izquierdo Bermúdez, who has been involved in this development since 2012. 1
To overcome the fragility of niobium-tin ($Nb_3Sn$), which replaces the previously used niobium-titanium ($NbTi$) alloy, the engineers employed a specialized "wind-and-react" fabrication process. 1 This method involves winding cables first and then subjecting them to heat treatment in an inert atmosphere to form the superconducting phase. 1 The thermal cycle includes plateaus at 210°C and 400°C before reaching a final peak temperature of approximately 650°C, a process that takes several days. 1
The production effort resulted in the creation of 250 coils, although 25 were scrapped due to performance failures attributed to human error or manufacturing challenges. 1 Quality inspections completed in September confirmed that the full-length 7.2-meter magnet achieved a peak magnetic field of 11.3 tesla. 1 The remaining units are currently being manufactured as backups. 1 The upgraded collider aims to increase particle collision rates to between 140 and 200 collisions per experiment. 1
评论
还没有评论,欢迎留下第一条。