作者Josef Chen实地探访了位于中国杭州的宇树科技(Unitree)工厂,发现其人形机器人的生产目前仍高度依赖人工组装,而非全自动化流程 1。数据显示,宇树在2025年的机械账面价值约为170万美元,却生产了近3.2万台机器人,单台分摊的机械成本仅约50美元 1。在这种模式下,即便包含外包组装商在内,人工成本在宇树2025年机器人生产成本中的占比也仅为8% 1。这一低成本结构得益于当前劳动力价格优势,使得短期内实现全面自动化在经济上并非最优选择 1。
然而,文章指出这种依赖人工的模式在美国等高人力成本地区难以复制,因为美国工厂的工时成本约为中国的6倍,若在当地生产,人工将占宇树成本的40%左右 1。因此,作者认为西方在制造“制造机器人的机器”以及利用AI解决编程瓶颈方面具备潜在优势。例如,HD Hyundai和Palantir声称通过AI代理可将修复机器人编程问题的平均时间从21.5天缩短至7.9天 1。此外,政策环境也在推动本土化制造,美国联邦通信委员会(FCC)规定新获批的人形机器人和机器狗需在美国制造,且65%以上的部件成本需来自美国,该比例将于2029年起提升至75% 1。
在技术成熟度与市场应用方面,宇树CEO王兴兴展示了一款运行GPT-6模型取水但速度较慢的G1机器人,公司预计机器人达到类似ChatGPT的突破时刻还需两三年 1。目前宇树的营收结构主要依靠科研和教育领域,2025年前九个月其四分之三的人形机器人营收来自这些板块,而来自工业场景的营收不到5% 1。与此同时,美国相关产业链正在加速布局,Agility Robotics已于11月5日在纳斯达克上市,富士康领投了其约2.01亿美元融资中的大部分 1。MP Materials也已与通用汽车完成磁体认证,计划于2026年底前开始从其德克萨斯州工厂交付产品 1。
An on-site investigation of Unitree Robotics’ manufacturing facility in Hangzhou, China, revealed that the company’s production of humanoid robots remains heavily dependent on manual assembly rather than full automation 1. In 2025, Unitree produced nearly 32,000 robots with total book value of machinery at approximately $1.7 million, resulting in a mechanical cost per unit of only about $50 1. Due to this low capital expenditure and inexpensive local labor, human effort accounted for just 8% of the total production cost, even when outsourced assembly providers were included 1. However, the economic calculus shifts dramatically in high-wage environments; if Unitree were to manufacture its robots in the United States, where hourly labor costs are roughly six times higher than in China, labor would represent approximately 40% of the total cost 1. This disparity suggests that while Chinese manufacturers currently benefit from cheap human inputs, Western firms may find it more economically viable to invest in automating the "machines that make machines" 1.
The current application of Unitree’s humanoid robots is largely confined to research and education, which generated three-quarters of the revenue from this sector during the first nine months of 2025, while industrial scenarios accounted for less than 5% 1. CEO Wang Xingxing demonstrated a G1 robot fetching water using a GPT-6 model, but the operation was slow, and the company estimates that a transformative "ChatGPT moment" for robotics is still two to three years away 1. Meanwhile, regulatory and technological developments in the West are shaping a different trajectory. The Federal Communications Commission (FCC) has mandated that newly approved humanoid robots and robotic dogs must be manufactured in the U.S., with 65% of component costs sourced domestically starting immediately and rising to 75% by 2029 1. Furthermore, AI agents from HD Hyundai and Palantir have reportedly reduced the average time required to fix robot programming issues from 21.5 days to 7.9 days 1. Supporting this shift toward domestic supply chains, Agility Robotics listed on Nasdaq on November 5, with Foxconn leading the majority of its ~$201 million funding round, while MP Materials completed magnet certification with General Motors, setting up deliveries from its Texas factory by the end of 2026 1.
评论
还没有评论,欢迎留下第一条。