用户近期针对AOOSTAR WTR Pro Ryzen版NAS在多个BSD系统上的表现进行了详细评测。1该机型支持NVMe和SATA存储，可装入10英寸机架。1评测对比了Linux、NetBSD、OpenBSD和FreeBSD等多个操作系统的待机功耗表现，其中BIOS待机功耗（单条32GB内存、无存储状态）约为28W。1
在不同系统的功耗对比中，Linux Alpine通过powertop工具优化后待机功耗约11W，Debian 13断开USB设备后降至8W。1BSD系统中，NetBSD 11.0待机功耗约18W，OpenBSD 7.9约15W。1通过逐步调优，FreeBSD 15.1最终实现了最低的8W待机功耗。1
FreeBSD的优化过程分三个阶段实现：首先启用C3 C-state将功耗降至12W，其次配置hw.pci.do_power_nodriver=3参数进一步降至11W，最后加载AMD GPU驱动达到8W的最优状态。1此外，用户还通过BIOS Advanced/Hardware Monitor设置成功控制了风扇噪音。1
A user has conducted a comprehensive performance evaluation of the AOOSTAR WTR Pro Ryzen-based NAS across multiple BSD operating systems, focusing on power consumption and system optimization.1 The machine, which fits into a 10-inch rack form factor and supports both NVMe and SATA storage, demonstrated varying idle power characteristics depending on the operating system and configuration.1
Testing revealed that the system consumed approximately 28W at BIOS idle state with a single 32GB memory module and no storage devices connected.1 When running operating systems, power consumption varied significantly: Linux Alpine achieved around 11W after optimization with powertop, while Debian 13 reached approximately 9W after disconnecting USB devices.1 Among BSD variants tested, NetBSD 11.0 showed the highest idle consumption at 18W, which improved to 14W after disconnecting USB peripherals, while OpenBSD 7.9 consumed around 15W and dropped to 10W after removing USB devices.1
Through systematic optimization, the user successfully reduced FreeBSD 15.1's idle power consumption to 8W, the lowest among all tested systems.1 The optimization process involved three sequential steps: enabling C3 C-state to achieve 12W consumption, configuring the hw.pci.do_power_nodriver parameter to 3 to reach 11W, and loading the AMD GPU driver to attain the final 8W target.1 Additional system refinement was possible through BIOS Advanced/Hardware Monitor settings, which allowed reduction of fan noise levels.1
评论
还没有评论，欢迎留下第一条。